LOCTITE ABLESTIK NCA 2280
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- Non-conductive
- Fast cure at low temperature
- High thixotropic index
Product Description
LOCTITE ABLESTIK NCA 2280 dual cure adhesive is designed for use in the assembly of temperature sensitive electronic components. ABLESTIK NCA 2280 has been formulated to a high viscosity and thixotropy to enable higher aspect ratios of dispensed adhesive, thus allowing for easier adjustments for the final assembly.
LOCTITE ABLESTIK NCA 2280 is black in color to prevent light penetration into the final assembled device. This product is formulated to temporarily cure when exposed to UV light, followed with a secondary thermal cure at low temperature. Temporarily curing the material allows for any necessary adjustments to the final device configuration.
ABLESTIK NCA2280
Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 28 days
Shipping in 12 weeks
Shipping in 12 weeksTDS, SDS & Technical Documents
Technical Specifications
General Properties
Thermal Properties
Physical Properties
Additional Information
Recommended Heat Cure Schedule
- 30 minutes @ 80°C
Recommended UV Cure
- High pressure mercury lamp:
- UV Wavelength, nm: 220-380
- Light Intensity, mW/cm²: 100
- Exposure Time, seconds: 2
Directions for Use
- Complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt and oils which can cause poor adhesion or corrosion in a bonded part.
- Apply adhesive to all surfaces to be bonded and join together.
