CONATHANE MR-5002
Harmonization Code : 3403.19 | Lubricating Preparations (With 70% or More Petroleum Oils) For Automotive and Other Uses
Main features
- Low-Viscosity Silicone Mold Release
- Epoxy/Polyurethane/Polyester/Plastic Resin Release
- 10 to 15-Minute Air Dry
Product Description
CONAP® MR-5002 Mold Release is a low-viscosity, silicone-based liquid mold release and parting agent for casting, potting, and molding operations. The clear material forms a thin release film that supports reproduction of fine mold detail and is applied by dip, brush, spray, or slosh. It is documented for releasing epoxy, polyurethane, polyester, and many plastic resins from metal, plastic, and other nonporous molds. The product may be used with room-temperature or heat-curing systems and typically air dries in 10 to 15 minutes before casting.
Key features
- Low-viscosity release film: Typical viscosity is 20 cP at 25°C.
- Broad resin compatibility: The release agent is documented for epoxy, polyurethane, polyester, and many plastic resins.
- Multiple application methods: It may be applied by dip, brush, spray, or slosh to clean nonporous molds.
Applications / Suitable for
- Simple and complex casting molds
- Potting and molding operations using nonporous tooling
- Epoxy, polyurethane, polyester, and plastic-resin release
TDS, SDS & Technical Documents
Technical Specifications
No specifications available.
Additional Information
As-supplied / before-processing properties
Typical as-supplied or mixed-state values unless otherwise stated. These values are not sales specifications.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Product form | Liquid mold release | N/A | As supplied |
| Color | Clear | N/A | As supplied |
| Viscosity | 20 | cP | At 25°C |
| Specific gravity | 0.67 to 0.68 | N/A | At 25°C |
| Solids content | 2.7 to 3.3 | % | Typical |
| Air-dry time | 10 to 15 | min | Typical before casting |
| Optional heat drying | 5 | min | At 60°C |
| Shelf life | Indefinite | N/A | Legacy technical data |
