LOCTITE 8060
Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg
Main features
- High-Temperature Anti-Seize Protection
- Controlled Stick Application
- Measured Assembly Torque Behavior
Product Description
LOCTITE LB 8060 is a silver, non-curing anti-seize lubricant supplied as an application stick for threaded and closely fitted metal parts. The naphthenic-oil formulation supports controlled placement on fine threads, snug slip fits, boiler and oven components, jet-engine hardware, and industrial turbines within the product's service limits. Typical use extends to 870 deg C, and the torque coefficient is 0.18 on 3/8 x 16 steel nuts and bolts. It is not a high-speed load-carrying lubricant and must not be used on ball or roller bearings or parts where lubrication is critical.
Key features
- High-temperature anti-seize protection: Typical use reaches up to 870 deg C for threaded and closely fitted metal assemblies.
- Controlled stick application: The solid format supports direct placement without dispensing a loose paste.
- Measured assembly torque behavior: A torque coefficient of 0.18 is reported on 3/8 x 16 steel nuts and bolts.
Applications / Suitable for
- Anti-seize protection for fine threads
- Snug slip fits and closely mated metal parts
- High-temperature boiler, oven, turbine, and jet-engine hardware within listed limits
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Chemical Properties
Additional Information
As-supplied / before-processing properties
Typical values and characteristics for the product before cure, application, or assembly.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Appearance | Silver | - | As supplied |
| Product form | Stick | - | As supplied |
| Base fluid | Naphthenic oil | - | Formulation description |
| Cure behavior | Non-curing | - | As supplied and in service |
| Specific gravity | 1.1 | - | 25 deg C |
| Penetration | 20 to 80 | 0.1 mm | ISO 2137 |
After-processing / final-state properties
Typical values for the cured, bonded, treated, or in-service product under the listed conditions.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Typical use temperature | Up to 870 | deg C | Typical use guidance |
| Torque coefficient | 0.18 | - | 3/8 x 16 steel nuts and bolts |
| Copper corrosion rating | 1a, slight tarnish | - | ISO 2160 |
| Dimensional stability | Pass | - | 77 deg C |
