ITW Performance Polymers Adhesives, Encapsulation & Industrial Repair Solutions

ITW Performance Polymers develops structural and semi-structural adhesives, potting and encapsulation compounds, industrial repair materials, protective polymer coatings, and epoxy grouting and chocking systems. Relevant technology platforms include Plexus® structural adhesives, Insulcast® electrical and electronic encapsulation materials, Devcon® repair and maintenance compounds, and Chockfast® and Epocast® grouting and chocking solutions for demanding industrial assemblies and equipment.

As an authorized ITW Performance Polymers distributor, Krayden supports customers evaluating materials for bonding, electrical protection, equipment repair, wear protection, and machinery foundation applications. Our team can help compare chemistries, substrates, processing requirements, application conditions, and other product-specific selection factors before a material is specified.

Markets Served by ITW Performance Polymers

Industrial OEM Industrial MRO Electronics & Electrical Transportation & Electric Vehicles Marine & Shipbuilding Wind Energy Mining & Aggregates Oil, Gas & Petrochemical Power Generation & Utilities Construction & Architecture

Featured ITW Performance Polymers Brands

Key technology platforms relevant to structural bonding, electrical encapsulation, industrial repair, and machinery grouting and chocking.

Plexus®

Structural and semi-structural adhesive technologies for bonding composites, thermoplastics, metals, and mixed-material assemblies across manufacturing applications.

Insulcast®

Epoxy and silicone potting and encapsulation compounds for electrical and electronic assemblies, including general-purpose and thermal-management applications.

Devcon®

Industrial repair, rebuilding, wear-protection, corrosion-control, and adhesive technologies for OEM and maintenance applications.

Chockfast®

Epoxy grouting and chocking systems used to support alignment, foundation, and machinery-installation requirements in industrial and marine environments.

Epocast®

Chocking compounds and related materials associated with machinery mounting and marine equipment-installation applications.

Structural adhesive application image placeholder

Structural & Semi-Structural Bonding

Structural Adhesives

ITW Performance Polymers supports structural bonding through Plexus methacrylate and polyurethane technologies and Devcon epoxy adhesive systems. These materials are used across composite, thermoplastic, metal, and mixed-material assemblies where the adhesive must be selected around substrate condition, bondline geometry, working time, fixturing, production method, and the mechanical and environmental demands of the finished assembly.

Plexus methacrylate structural adhesive image placeholder

Chemistry

Methacrylate Structural Adhesives

Plexus methacrylate adhesives are designed for structural bonding across composite, thermoplastic, coated-metal, and raw-metal assemblies. Product selection should account for the exact substrate combination, working time, required gap fill, surface preparation, cure behavior, and assembly process.

Plexus MA420 Structural Adhesive Plexus MA422 Structural Adhesive Plexus MA8110 Direct-to-Metal Structural Adhesive

Plexus polyurethane structural adhesive image placeholder

Chemistry

Polyurethane Structural Adhesives

Plexus polyurethane structural adhesives extend the portfolio into applications that balance structural bonding with flexibility and thermal or mechanical stress management. Exact suitability depends on the product, substrate set, bondline, processing conditions, and service environment.

Devcon epoxy structural adhesive image placeholder

Chemistry

Epoxy Structural Adhesives

Devcon epoxy adhesives provide a structural-bonding option for industrial assemblies, particularly where metal bonding, toughness, gap filling, or chemical and environmental exposure are important considerations. Confirm product-specific cure, mix, packaging, and substrate requirements before selection.

Devcon HP250 Toughened Structural Epoxy Adhesive Devcon 10 Minute Epoxy Adhesive

Potting and encapsulation application image placeholder

Insulcast® Electrical Protection Materials

Potting and Encapsulation Compounds

Insulcast epoxy and silicone compounds are used to pot, cast, and encapsulate electrical and electronic assemblies where protection, insulation, thermal management, flow, flexibility, or production processing requirements influence material choice. Applications include printed circuit boards, power supplies, transformers, batteries, ignition components, and other electrical equipment; the appropriate chemistry depends on the assembly design and product-specific electrical, thermal, mechanical, and processing requirements.

Insulcast epoxy potting compound image placeholder

Chemistry

Epoxy Potting & Casting Compounds

Insulcast epoxy systems cover general-purpose and specialty potting or casting requirements. Selection variables can include viscosity, cure schedule, mix ratio, hardness, thermal conductivity, chemical exposure, electrical properties, and the size and geometry of the encapsulated assembly.

INSULCAST 116 FR Epoxy Potting & Casting Compound INSULCAST 502 Low-Viscosity Epoxy Casting Resin INSULCAST 987 Semi-Flexible Epoxy Potting Compound

Insulcast silicone potting compound image placeholder

Chemistry

Silicone Potting & Encapsulation Compounds

Insulcast silicone systems provide a more flexible encapsulation option for assemblies where stress relief, thermal cycling, repairability, or low-viscosity flow may be important. Cure mechanism, viscosity, thermal properties, adhesion requirements, and service environment should be checked for the exact formulation.

INSULCAST RTVS 27 Flame-Retardant Silicone Encapsulant INSULCAST RTVS 8128 High-Voltage Silicone Encapsulant

Thermal-management potting application image placeholder

Function

Thermal-Management & Specialty Encapsulation

Selected Insulcast epoxy and silicone formulations are engineered for applications where heat transfer, flow around components, flame performance, electrical insulation, or other specialized requirements are part of the encapsulation design. Confirm the required properties against the exact product data before use.

INSULCAST RTVS 8127 Thermally Conductive Silicone Encapsulant

Industrial repair and protective coating application image placeholder

Devcon® Maintenance & Repair Solutions

Repair Compounds and Protective Coatings

Devcon repair compounds and coating technologies are used to rebuild damaged surfaces, repair metal or rubber components, and protect industrial equipment against wear, abrasion, corrosion, erosion, and related maintenance challenges. Choosing the right material depends on the base substrate, damage mechanism, application thickness, surface preparation, equipment geometry, cure window, and the mechanical, chemical, or wear conditions expected in service.

Metal rebuilding and repair compound image placeholder

Repair Type

Metal Rebuilding & Repair Compounds

Metal-filled and related polymer repair compounds can be used to rebuild worn or damaged equipment surfaces, fill voids, restore geometry, or prepare components for continued service. Material choice should reflect substrate condition, repair depth, application orientation, machining or finishing needs, and expected service exposure.

Devcon Titanium Putty 10760 Devcon Plastic Steel Putty

Rubber and conveyor belt repair image placeholder

Repair Type

Rubber & Belt Repair Compounds

Flexible urethane repair materials support maintenance of conveyor belts, rubber linings, rolls, and related components where tears, gouges, worn areas, or localized damage must be repaired. Selection depends on repair geometry, flexibility, surface preparation, cure time, abrasion conditions, and return-to-service requirements.

Devcon Flexane 80 Liquid Urethane Devcon Flexane 94 Liquid Urethane

Wear and abrasion protective coating image placeholder

Coating Type

Wear & Abrasion Protective Coatings

Devcon wear-resistant epoxy compounds and coatings are used on industrial equipment exposed to sliding abrasion, impact, and material handling. Product selection should consider wear mechanism, particle size, impact severity, surface profile, coating thickness, equipment geometry, and the required maintenance window.

Corrosion and erosion protective coating image placeholder

Coating Type

Corrosion & Erosion Protective Coatings

Ceramic-filled and other protective epoxy coatings can be used to repair or protect pumps, tanks, pipes, shafts, and process equipment exposed to corrosive or erosive conditions. Confirm substrate preparation, chemical exposure, application method, coating build, cure schedule, and service-temperature requirements for the selected system.

Epoxy grouting and machinery chocking application image placeholder

Chockfast® & Epocast® Foundation Systems

Epoxy Grouts and Chocking Compounds

ITW Performance Polymers supplies epoxy grouting and chocking technologies for machinery foundations, alignment, mounting, and load-transfer applications. Chockfast systems span industrial grouting and chocking, while Epocast products are associated with machinery and marine chocking. Material selection and installation should be based on equipment type, load path, foundation condition, placement geometry, grout or chock dimensions, application temperature, and the product-specific installation procedure.

Material Type

Epoxy Machinery Grouts

Chockfast epoxy grouts are used in foundation and machinery-installation work where equipment alignment, load transfer, dimensional stability, and installation conditions must be controlled. The appropriate system depends on the equipment, foundation, grout depth, pour geometry, temperature, and installation procedure.

Selection Considerations

Equipment load, foundation condition, and alignment requirements
Grout depth, pour geometry, and installation temperature
Surface preparation, placement method, and specified cure procedure

Machinery chocking compound image placeholder

Material Type

Machinery Chocking Compounds

Chockfast and Epocast chocking compounds support machinery mounting where the material must fill the interface between equipment and its foundation or support structure. Selection should be based on equipment configuration, chock dimensions, load, installation environment, and the exact product procedure.

Selection Considerations

Machinery type, load path, and required chock geometry
Chock thickness, surrounding structure, and application temperature
Installation accessories, release provisions, and cure verification

Talk to our Experts

Krayden can help compare ITW Performance Polymers materials for structural bonding, potting and encapsulation, industrial repair and protection, and machinery grouting or chocking. Our team can support product selection, substrate and application requirements, processing considerations, and comparison of candidate materials for your assembly or maintenance application.

Contact our team Call +1 (800) 448-0406

ITW Performance Polymers Quick Reference

Brands Carried

Plexus, Insulcast, Devcon, Chockfast, Epocast

Core Technology

Structural Bonding, Encapsulation & Industrial Polymer Systems

Top Categories

Structural Adhesives, Potting & Encapsulation, Repair & Protective Coatings, Grouts & Chocking

Key Markets

Industrial OEM & MRO, Electronics, Transportation, Marine, Energy, Mining & Petrochemical